+49 (0) 8067 / 90 57 - 0


We are available for consultation at any time.

We are always available to answer your questions about UNI-TRANS - The universal Trailer.

Six meters of space for universal transport tasks

Sometimes a little more is anything but a disadvantage. This is impressively demonstrated by the FIT-ZEL Uni-Trans transport trailer. Due to its sophisticated design, dimensions, high-quality workmanship and various technical details, it lives up to its name in terms of universality.
Main advantages of the UNI-TRANS
Up to 2,610 kg payload
Low ramp angle
Full aluminium construction
Extra long - 6 meters
Up to 2,400 cm width
Universal means of transport
Double profile construction
3 Axes

Information UNI-TRANS

Here you can find all information about ALGEMA FIT-ZEL Uni-Trans. You want all information at a glance? Click here for the brochure. 

Lightweight and durable thanks to high-quality construction

From the chassis in reinforced double profile construction to the loading rails and the loading platform, the FIT-ZEL Uni-Trans relies on a high-quality aluminum construction throughout. This means that the Uni-Trans not only stands for durability, but also for a low dead weight.

1.5 + 1.5 + 1.5 = high payload

Not only do the three axles characterize the side view of the FIT-ZEL Uni-Trans, but also its load capacity. Although the Uni-Trans reaches a technically approved total weight of 4.5 t, the Trailer can only be approved with a maximum permissible total weight of 3.5 t.

Flat ramp angle and low loading height

The FIT-ZEL Uni-Trans does not want to reach high, but prefers to stay on the ground. Thanks to the low loading height of 580 cm and a ramp angle of only 6.5°, vehicles of different sizes can be loaded without any problems. The two aluminum loading slides also contribute to this. These can be moved sideways and locked.

Choice between XL and XXL

As far as the loading width is concerned, the FIT-ZEL Uni-Trans prefers a little more than a little too narrow. The universal trailer is available with 2.2 m and 2.4 m in two different loading widths.

Technical data UNI-TRANS

Errors and omissions excepted. All dimensions and weights are approximate. Accessories increase the unladen weight. Illustrations may contain optional equipment.
Type35-22 / 60 T35-24 / 60 T
Total weight3500 kg3500 kg
Dead weight890 kg920 kg
Payloadapprox. 2610 kgapprox. 2580 kg
Drive-up angle6,5°6,5°
Loading lengthapprox. 6000 mmapprox. 6000 mm
Loading width2200 mm2400 mm
Loading heightapprox. 580 mmapprox. 580 mm

We are available for consultation at any time.

We are always available to answer your questions about Uni-Trans.

These accessories are available for the UNI-TRANS

As with all our trailers and vehicles, there are also a lot of practical accessories and extensions for the Uni-Trans that can make everyday life with the Uni-Trans easier.
Cable winch
Drive-on device
Aluminium floor
Plastic floor
Traversing device
Spare wheel holder
Hand cable winch
Electric wire rope winch
Battery supply
Remote control winch
Additional charging rails
Ramp wedges
Drive-up wedge holder
Wheel stop bracket
Lift axle
Frequently Asked Questions
Can't find the answer you're looking for? Contact our customer support team.
What is the payload of the car transport trailer?
The Uni-Trans has a payload of approx. 2.6 t.
What are the loading dimensions of the Uni-Trans?
There is a loading length of 6 m and width from 2.2 to 2.4 m.
How many axles has the car transport trailer UNI-TRANS?
The FIT-ZEL Uni-Trans is available with 3 axes.
What is the ramp angle of the FIT-ZEL Trailer?
The ramp angle of the Uni-Trans is only approx. 6.5°.

Downloads UNI-TRANS

All information at a glance - The Uni-Trans brochure. Dimensional drawings, standard equipment, texts & information, warranty and much more. Download now for free and browse digitally. 
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram