Mercedes-Benz Sprinter 907 EK, 419 CDI, 120 kW (163 hp), 6-speed manual gearbox, 4.0 t gross vehicle weight, rear-wheel driveMB arctic white (repainted to driver's cab Green 3964Wheelbase 4,325 mm,
- LED main headlights
- E3M MBUX multimedia system with 7-inch touchscreen - AR3 Axle ratio i=4.182
- A50 Front axle with increased load capacity
- BA3 Active Brake Assist
- RM0 All-season tires
- R87 Spare wheel
- K13 Main tank 71 liters
- QA3 Vehicle pre-fitting for AH load up to 3,500 kg with 7,000 kg gross combination weight
- L13 Front fog lights with cornering light
- L07 Clearance lights
- LC4 Comfort roof control unit
- CN2 Radiator grille frame in body color
- S87 Driver's seat box, low
- SB3 Swivel seat, comfort version, driver's seat
- S23 Two-seater passenger seat
- HH9 Semi-automatically controlled air conditioning TEMPMATIC
- E1D Digital radio (DAB)
- JD6 Intelligent tachograph EU
- C6L Multifunction steering wheel
- JF1 Rain sensor
- FM3 WET WIPER SYSTEM
- JW5 Lane departure warning system
- MD4 Speed limiter 90 km/h EC
- E07 Hill start assist
- MS1 TEMPOMAT
Blitzlader2 MB EK Box Moetefindt
- Including air-sprung chassis
- Body for Mercedes Sprinter New Eka rear-wheel drive 4.1 t
- Warning buzzer for tipping process
- Second climbing aid (1x left, 1x right)
AIR-SPRUNG CHASSIS BL2
- Conversion of an N1 to N2 chassis with tandem axle
- All 3 axles with disc brakes
- Chassis with air suspension
- Pendle axle system, Panhard rod-guided
- Traction-optimized axle load distribution (with rear-wheel drive)
- Hydraulically tiltable articulated chassis
LEVEL CONTROL BL2 AIR SUSPENSION
- Compressor-controlled air suspension
MOETEFINDT ALULOCHBLECHBIDEN (Kässbohrersystem) with 4 approach brackets and over-wheel lashing strapsE-WINDE BL2 FP2 COME UP
- Come Up Rhino 8, 3,630 - 2,269 kg pulling force (position 1 - 4)
- on winch rail, infinitely adjustable
- without winch cable
- with planetary gear
- Rope speed 0.7 - 3.0 m/min
- with forward and reverse travel, rope freewheel and cable remote control
SYNTHETIC FIBER WINCH CABLE
- 15 m synthetic fiber winch cable, for Come Up and Algema Winch
- with safety hook
- Weight approx. 2 kg
TOOL BOX BL2 RIGHT
- in side panel, in front of the axles
- 780 x 310 x345 mm, lockable
Moetefindt box body for Algema Blitzlader 2.100 mm clearance height
- The outer frame and body are made entirely of aluminum - side walls and roof glued and clamped in sandwich construction
- Moetefindt outer frame with integrated slotted rail without lashing fittings
- Rear flap as access ramp with gas spring lifting aid and internal espagnolette lock, lockable
- Double doors on the right as an exit (3000 x 1800 mm) with internal espagnolette lock and rubber hinge
- approx. 300 mm high fixed side wall above the doors, completely continuous
- Rear corner posts max. 35 mm wide
- Rubber seal on the tailgate then drive-through width 2220 mm
- Paintwork in special color Green 3964 Color stripes Grey 3963 Rubber seals in black
Technical data:
Body dimensions in basic configuration
- Inside LxW: 5500 x 2220 mm
- Outside: W:2300 mm
- Clearance height rear 2100 mm
- Clear passage width 2220 mm
- System construction roof, front wall and side panels separate
- Double doors additionally on the right-hand side Opening width 3000 x 1800 mm, with double rubber seal and internal espagnolette lock, lockable Double doors each positioned in the middle of the side wall length, fixed box wall continuous above the doors
- T-hooks as door stops
- Switch for operating the interior lighting in the dashboard
- Interior panelling with Dibond panels at the top right and left over the entire length, approx. 300 mm high strip screwed to cover the cable routing Outline lights at the rear top semi-circular red/white at the rear bottom as LED horns underneath the body
- 2 mirrors on the right and left at the front of the body as a drive-in aid Handles on both sides, centered at the height of the rear double door
- Hydraulic tailgate
- Painted 3-D roof spoiler
- Reversing camera system, activated for MBUX
- ED warning system Sputnik Compact, right and left in the rear corners of the luggage compartment, switch on automatically when tilted, can be deactivated via touchscreen
OPTIONALLY retrofittable:
- not yet included in the price -
Trailer coupling REMOVABLE
- Trailer load and GVW described for bodywork
- Including 13-pin socket
1.800,00€ net
Additional aluminum ramps can be folded out mechanically
- for initial drive-on angle of less than 3°
2.200,00€ net
